info@hbmeter.cc
+86 152 3780 0315
Built Around Your Process

Industry Flow Measurement Solutions

The question is never which brand of flowmeter. The question is always which measurement principle, which material, which accuracy class — for this fluid, at this pressure, in this installation.

Discuss Your Application
Why Industry-Specific Knowledge Matters

The right flowmeter always starts with the process

A flowmeter decision is never just about choosing a product category. It is about avoiding the cost of a wrong specification in a real process environment. Different industries create different measurement risks — corrosion, solids, pressure fluctuation, hygiene requirements, hazardous areas, billing accuracy, process control sensitivity. That is why our solution pages are built to help users start from the application first.

Industry conditions decide the flowmeter

The fluid alone is never enough. Temperature, pressure, solids, conductivity, viscosity, sanitation, and safety class all influence which technology truly fits.

The same meter is not right everywhere

A flowmeter that performs well in one industry may be the wrong choice in another because the fluid, duty, installation limits, and compliance requirements are different.

Right guidance prevents expensive mistakes

Our goal is not simply to help buyers choose a meter. It is to help them avoid the wrong one before cost, downtime, or process failure makes the decision more expensive.
Three Types of Support

Select your industry

The right meter isn't the one in stock. It's the one right for your fluid, your process, your industry.
Certifications & Standards

The certifications that industrial applications actually require

Industrial flowmeter procurement specifications routinely require certifications that generic suppliers cannot provide. HBYB carries the full range of certifications required for process, hygienic, hazardous-area, and fiscal metering applications.
SIL-3 Approved
Explosion-proof certification for Groups IIA, IIB, and IIC — covering natural gas, solvents, and hydrogen service in Zone 1 and Zone 2 hazardous areas.
CE Marking
CE conformity declaration for electromagnetic compatibility (EMC), low voltage directive, and pressure equipment directive across all applicable product lines.
IP67/IP68 Rated
Ingress protection to IP67 standard on all process instruments; IP68 available for submerged and continuous washdown applications.
FDA/Hygienic Standards
316L stainless steel wetted materials, tri-clamp connection conforming to DIN 11851 / ISO 2853 / 3-A Sanitary Standards for food, beverage, and pharmaceutical service.
Calibration Traceability
Factory calibration traceable to national measurement standards, with individual calibration certificate issued per serial number for every instrument shipped.
ISO 9001 Quality System
Quality management system certified to ISO 9001, covering design, manufacturing, calibration, inspection, and after-sales technical support.
The right starting point is your process, not our catalog.

Ready to find your solution?

Select your industry above for detailed application guidance, instrument recommendations, and specification notes tailored to your sector. Or contact our technical team directly — we respond to every inquiry with a specific recommendation, not a product list, within 24 hours.If you already know your pipe size, fluid, and flow range, we can return a preliminary meter recommendation in the same email. If you're not sure where to start, describe the application and we'll help you work through the selection logic.
Phone & WhatsApp
+86 152-3780-0315 →