Insert Type Electromagnetic Flowmeter
HBLD/C Insert type electromagnetic flow meter is a new flow meter developed on the basis of pipeline electromagnetic flow meter. It retains the advantages of pipeline electromagnetic flow meter, and it is difficult to install pipeline electromagnetic flow meter for pipeline.
-
Tel:
+86 13353783678 -
E-mail:
info@hbmeter.cc
Product description
HBLD/C Insert type electromagnetic flow meter is a new flow meter developed on the basis of pipeline electromagnetic flow meter. It retains the advantages of pipeline electromagnetic flow meter, and it is difficult to install pipeline electromagnetic flow meter for pipeline. Defects such as large cost, according to the Nikurads (NIKURADS) principle, the average flow velocity of the fluid is measured by the electromagnetic method to obtain the volume flow of the fluid. In particular, after adopting pressure opening and pressure installation technology, the Insert type electromagnetic flow meter can be installed without water, and can also be installed on cast iron pipes and cement pipes. The successful development of the Insert type electromagnetic flow meter provides a new method for the detection of fluid flow. Its working principle is the same as that of electromagnetic flow meter, which adopts the principle of flange induction.
technical parameter
| ————————Technical parameter——————— | ||
| Applicable scene | closed pipeline | |
| Caliber range | DN100-DN3000 | |
| Lining type | ABS, PTFE; | |
| Electrode type | 316L, Ha B, Ha C, titanium, tantalum, platinum-iridium alloy, stainless steel tungsten carbide | |
| Pressure range | 0.6-1.6Mpa; | |
| Temperature resistance | -25~80℃; | |
| Accuracy | ±1.5%, ±2.0%, ±2.5% | |
| Protection leve | sensor IP65\IP67\IP68 (optional), converter IP65 | |
| Output type | frequency, pulse, 4-20mA, RS485, Modbus protocol; Hart protocol (optional), Profibus DP (optional) | |
| Structure form | simple type, threaded ball valve type, flange ball valve type | |
| Power supply | 85~250V, 45~63Hz, 20VDC --- 36VDC, 3.6V battery power supply (DN100-1000) | |
| Straight pipe section requirements | front 5DN, rear 3DN | |
| Sensor material | 304, 316 (optional) | |
| Structure form | Integrated type, split type | |
